Automatic Stability Control Asc Oe - BMW R 1200 R Rider's Manual

Automatic Stability
4
Control ASC
56
Deactivating ASC
function
Switch on the ignition.
You have the option of
deactivating the ASC
function while the motorcycle
is on the move.
z
Press and hold down
ASC button 1.
OE
has not completed the ASC
warning light changes from
flashing to ON.
When the ASC warning light
comes on, release the ASC
button within five seconds.
The ASC function is deac-
tivated.
Activating ASC function
Press and hold down
ASC button 1.
ASC warning light
shows; if self-diagnosis
ASC warning light re-
mains ON.
ASC warning light goes
out; if self-diagnosis has
not completed the ASC warn-
ing light changes from ON to
flashing.
When the ASC warning light
goes out or starts to flash,
release the ASC button
within five seconds.
The ASC warning light re-
mains off.
If ASC self-diagnosis did not
complete, the ASC warning
light continues to flash.
The ASC function is activ-
ated.
Instead of pressing the ASC
button, you have the option
of switching the ignition off
and then on again.
An ASC fault has
occurred if the ASC
warning light shows when the
motorcycle accelerates to a
speed in excess of 10 km/h