Table of Contents
Advertisement
3
NOTICE
This error message shows briefly
36
only after the Pre-Ride-Check
completes.
Possible cause:
The integral battery in the tyre-
pressure sensor has lost a sig-
nificant proportion of its original
capacity. There is no assurance
of how long the tyre pressure
control system can remain opera-
tional.
Seek the advice of a specialist
workshop, preferably an author-
z
ised BMW Motorrad dealer.
ABS self-diagnosis not
completed
ABS warning light flashes.
Possible cause:
ABS self-diagnosis not
completed
The ABS function is not avail-
able, because self-diagnosis
did not complete. (The motor-
cycle has to reach a defined
minimum speed for the wheel
speed sensors to be checked:
5 km/h)
Pull away slowly. Bear in mind
that the ABS function is not
available until self-diagnosis has
completed.
ABS fault
ABS warning light flashes.
Possible cause:
The ABS control unit has detec-
ted a fault. The ABS function is
not available.
You can continue to ride. Bear
in mind the more detailed in-
formation on situations that can
lead to an ABS fault message
(
108).
Have the fault rectified as
quickly as possible by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
ABS deactivated
ABS warning light flashes.
Possible cause:
The rider has switched off the
ABS system.
Activate the ABS function.
ASC intervention
The ASC warning light
quick-flashes.
The ASC has detected a degree
of instability at the rear wheel
and has intervened to reduce
torque. The warning light flashes
for longer than ASC intervention
lasts. This affords the rider visual
Advertisement
Table of Contents
