Table of Contents
Advertisement
Activating ABS function
Press and hold down button 1
until the ABS warning light
changes status.
ABS warning light goes out;
if self-diagnosis has not
completed it starts flashing.
Release button 1 within two
seconds.
The ABS warning light re-
mains off or continues to
flash.
The ABS function is activated.
You also have the option of
switching the ignition off and
then on again.
If you switch the ignition off
then on again and the ABS
light comes back on, there is a
fault in the ABS.
Automatic Stability
Control ASC
with Automatic Stability Con-
OE
trol
Deactivating ASC function
Switch on the ignition.
You have the option of de-
activating the ASC function
while the motorcycle is on the
move.
Press and hold down button 1
until the ASC symbol changes
status.
ASC symbol appears on
the display.
Release button 1 within two
seconds.
ASC symbol continues to
show.
The ASC function is deactiv-
ated.
4
49
z
Advertisement
Table of Contents
