Toshiba E-STUDIO2000AC Scanning Manual page 55

3.USEFUL FUNCTIONS
4 On the Scan menu, press [Scan].
To clear the scan functions, select one and press [Reset]. The screen on the touch panel returns to the basic scan
menu and the selected button is cleared.
 When the equipment has scanned more than 1000 pages in a job, the "The number of originals exceeds the
limit. Do you want to save stored originals?" message appears. If you want to save the scans, press [Yes].
 When the temporary workspace is full on the equipment's hard disk, a message appears and the job is
canceled. The available workspace can be viewed on the TopAccess [Device] tab.
 If the number of jobs waiting to store scans in the equipment's hard disk exceeds 20, a message appears to
indicate that the equipment's memory is full. In this case, wait a while until memory becomes available again
or delete unnecessary jobs from [Job Status].
To learn more about viewing job statuses, refer to the Software Troubleshooting Guide.
Scanning With Dual Functions (Dual Agents) 55