Extron electronics CrossPoint 450 Plus Series Setup Manual page 16

Command
Create ties
• Commands can be entered back-to-back in a string, with no spaces. For example: 1*1!02*02&003*003%4*24$.
N
• The matrix switchers support 1-, 2-, and 3-digit numeric entries (1*1!, 02*02&, or 003*003%).
N The & tie command for RGB and the % tie command for video can be used interchangeably.
N The & read tie command for RGB and the % read tie command for video can be used interchangeably.
X! X@
to output video
Tie input ,
and audio
Example:
X! X@
Tie input to output , RGBHV
only
Example
(see 2nd Note, above):
X! X@
to output , video
Tie input
only
Example
(see 2nd Note, above)
X! X@
to output , audio
Tie input
only
Example:
Read RGB output tie
Read video output tie
Read audio output tie
X!
= Input number
N
X@
= Output number
Command
Video and audio mute commands
RGB/video mute
RGB/video unmute
Read RGB/video mute
Global RGB/video mute
Global RGB/video unmute
Audio mute
Audio unmute
Read audio mute
Global audio mute
Global audio unmute
View output mutes
Example:
CrossPoint 450 Plus 3232 HVA
N The "Mut" portion of the response appears only when the switcher is in Verbose mode 3. See the Verbose mode command on page 4-8.
X@
= Output number
N
X#
= Mute
X$
= Video/audio mute:
ASCII command Response
(host to switcher) (switcher to host)
X! X@ X@
* ! Out
1*3!
Out03
X! X@ X@
* & Out
10*4&
Out04
X! X@ X@
* % Out
7*5%
Out05
X! X@ X@
* $ Out
24*04$
Out04
X@ X!]
&
X@ X!]
%
X@ X!]
$
00 – (maximum number of inputs for your model) (00 = untied)
01 – (maximum number of outputs for your model)
ASCII command Response
(host to switcher) (switcher to host)
X@
*1B Vmt
X@
*0B Vmt
X@ X#]
B
1*B
Vmt1
0*B
Vmt0
X@
*1Z Amt
X@
*0Z Amt
X@ X#]
Z
1*Z
Amt1
0*Z
Amt0
E } X$ 1
VM ,
E }
VM Mut00001000000230000000000000000000
01 – (maximum number of outputs for your model)
0 = off (unmuted)
1 = on (muted)
0 = no mutes
1 = video mute
2 = audio mute
Additional description
X! ]
In All Tie input
• •
]
Tie input 1 video and audio to output 3.
In01 All
• •
X! ] Audio breakaway.
In RGB
• •
] Tie input 10 RGB to output 4.
In10 RGB
• •
X! ] Audio breakaway.
In Vid
• •
Tie input 7 video to output 5.
]
In07 Vid
• •
Audio breakaway.
X! ]
In Aud
• •
Tie input 24 audio to output 4.
]
In24 Aud
• •
RGBHV input
Video input
Audio input
Additional description
X@ ]
*1 Mute output
X@ ]
*0 Unmute output
1 = mute on, 0 = mute off.
Mute all RGB outputs.
]
] Unmute all RGB outputs.
X@ ]
*1 Mute output
X@ ]
*0 Unmute output
1 = mute on, 0 = mute off.
] Mute all audio outputs.
Unmute all audio outputs.
]
X$ 2 X$ n ] X$
, ... Each
output, starting from output 1.
n = the maximum number of outputs for this
model.
Output 2, 3, and 5 audio or RS-232 are
muted. All other outputs are unmuted.
X!
's video and audio to output
X! X@
is tied to output .
X! X@
is tied to output .
X! X@
is tied to output .
X@
RGB (video off).
X@
RGB (video on).
X@
audio (audio off).
X@
audio (audio on).
response is the mute status of an
]
X@
.