Installing Breakers - Generac Power Systems rtg16eza1 Owner's Manual

Installation
3.8 — Installing Breakers
IMPORTANT: AFCI and GFCI circuit breakers are not
provided by the factory. If the circuits to be protected
require AFCI or GFCI protection, or both, then listed
protection shall be provided by the installer.
The factory supplied breakers can be changed by the
installer. Install listed and labeled circuit breakers that are
compatible with the transfer switch (See
Circuit Breakers
). Follow all applicable NEC and CEC code
Listed for Use
articles for any field modifications.
Insert the tab on the breaker (A) into the hook on the bus
(B). Push the breaker into the bus until it snaps into place.
B
A
Figure 3-2. Installing Breakers
8 Automatic Transfer Switch Owner's Manual