Table of Contents
Advertisement
Tracking adjustment ...
should follow the same path as they rotate.
(1) Rev up the motor until the helicopter becomes
light on its skids. Stand about 15 feet(4 meters)
alway from the helicopter.
(2) When the two main rotor blades are in
track it means the blade tips should follow
the same path as they rotate.
(3) When both blades are in track, the blade
tips will appear to overlap as seen from
the edge of the rotor plane.
If the blades are out of track, then adjust
one of the pushrods that connects to the
main rotor blade pitch arm.
In hover, the main blades should be
around 5.5 to 6 degrees in pitch.
Flying Adjustments (1)
When the two main rotor blades are in track it means their blade tips
out of track
in track
increase
throttle gently
and not too
much
Redo steps (1) to (3) until
the blades are
properly.
25
tracking
Hide quick links:
Advertisement
Table of Contents
