Engine Assembly - THUNDER TIGER Raptor 30 V2 Assembly & Maintenance Manual

9 Engine Assembly

Note: A piston lock purchased from your dealer will make this a
much easier task. You must replace the standard throttle arm
w/the extended throttle arm and attach the linkage ball.
(1) HMC3-10B Socket Screw(M3x10)..... 2
(2) BV0589 Clutch Shoe..........................1
(3) BV0038 Cooling Fan.......................... 1
(4) No.9604 TT PRO-39H(R) Engine.......1
(5) BK0170 Shim.....................................1
10 Main Frame Assembly-Part4
Add blue Loctite to all metal to metal screw surfaces.
After installing the engine, connect the silicone fuel tube
to the carburator and muffler.
(1) HMC3-14B Socket Screw(M3xH)....... 8
(2) HMC3-35B Socket Screw(M3x32)..... 2
(3) BK0087 Flat Washer........................
(4) BK0037 Engine Mount........................ 1
(5) No.9219 Muffler................................... 1
(6) Engine Assembly
(7) BA1578 Muffler Gasket.......................1
(3) BK0087
(1) HMC3-14B
Add Blue Locktite
(3) BK0087
(6) Engine Ass'y.
(2) HMC3-35B
(1) HMC3-10B
Tighten the engine nut securely by
grabbing the plastic fan with a towel.
(3) BV0038
Add Blue Locktite
4
(1) HMC3-14B
10
(4) No.9604
(7) BA1578
(4) BK0037
(1) HMC3-10B
(2) BV0589
(5) BK0170
Linkage Ball to
throttle Arm
(3) BK0087
(1) HMC3-14B
Add Blue Locktite
(3) BK0087
(5) No.9219
Engine mount
Attachment