Collective Travel For F3C And 3D Flying - THUNDER TIGER Raptor 30 V2 Assembly & Maintenance Manual

Collective Travel for F3C and 3D Flying

*To achieve +12˚ to -8˚ of collective travel range, the steel linkage ball must be moved to the inner
location as shown in the figure.
*Use ATV function of the transmittler to get the necesary servo travel.
*High End Blade Pitch Setting
Linkage Position for F3C or 3D
The molded "pointer" should line up with the upper limit mark, which
should provide about 12˚ of blade pitch.
*Low End Blade Pitch Setting
Position for F3C or 3D
For intermediates set the low end to -4˚. For advanced F3C and 3D flying,
set the low end to -8˚.
19
Throttle at High Position
Throttle at Low Position