Changing The Tail Drive Belt; Changing The Flybar - THUNDER TIGER Raptor 30 V2 Assembly & Maintenance Manual

Changing the tail drive belt:

(1)Loosen and remove all the necessary
screws.
(2)After installing the new belt, make sure
the belt is rotated 90˚ counter clockwise.
(2)

Changing the flybar:

(1) Loosen or remove the M3x10 set screws.
(2) Unscrew the control paddles.
* After reinstalling the flybar and paddles, make
sure the paddles are level and flat.
* Make sure the distance from the rotor shaft to
both paddles are the same.
(1)
(1)
* If the flybar is not perfectly straight or
smooth, it can be lightly sanded.
33
(1)
(1)
(1)
(2)
(1)