Table of Contents
Advertisement
¨
Packet Sent:
¨
Packet Received:
¨
Elapsed Time:
¨
Signal level:
calculated as the percentage of its signal level measurement relative to the full signal level.
The "Access Point Loopback Test" window will be displayed after pressing the [Start] button.
This window contains same status / statistical information in the "Master Test Station" window.
It works only in "Infrastructure Mode".
l Access Point Browser
Select the [Access Point Browser] in and you will see a screen shown as below. Choose [Go], all
the active Access Points will be shown.
Fig4.11 Loopback through Access Point
Total test packets have been sent.
Total responding packets have been received.
Total testing time.
The signal level when receiving last responding packet. The signal level is
32
Advertisement
Table of Contents
