Table of Contents
Advertisement
NOTE: All parameters you modified on the wireless LAN adapter is kept in the flash
ROM (non-volatile memory) on the adapter. The new parameters will take
effect thereafter even though you boot your PC into any other operating
systems or insert the adapter into another PC.
C. Diagnostics Tools Screen
The Diagnostics Tools screen shows all diagnostics tools in the WireFree Utility. There are
buttons for executing the following diagnostics tools:
¨ [Site Survey] - Inspect channel quality for your site.
¨ [Link Quality Test] - Test point-to-point communication quality.
¨ [Access Point Browser] - Show all active WireFree Access Points in your site.
The instructions of using each diagnostics tool are as follows:
l
Site Survey
When Site Survey screen is displayed, the channel quality of all 14 radio channels will be
displayed. These channel quality measurements are shown on each gauge for the 14 radio
channels. The higher bar means the radio channel having better quality (i.e., less
interference).
The channel quality is scanned channel-by-channel repeatedly. You may see some of the
gauges changing their height occasionally. To determine the channel quality in a longer
time span, you can refer to the average channel quality measurement from the small-shaped
dot in each channel quality gauge.
Wireless LAN Utility – Diagnostics
Tools
Fig4.7 Diagnostic Tools
28
Advertisement
Table of Contents
