Table of Contents
Advertisement
NT drivers. Insert the WL-2400 Driver and Utility diskette into the CD-ROM drive, and
then type E:\WL2400\ (Assume the CD-ROM drive letter is E)
5.
Windows NT will attempt to locate an INF file in the specified path. If you have entered
the path name correctly, Windows NT should copy the appropriate drivers to the
Windows NT system. You need to recognize the selection.
6.
A "WireFree/WL-2400 Wireless LAN Adapter Setup" dialog box will show up.
Please select the "Default Channel" , "Network Case" , "RTSThreshold" and
"ESSID" manually. Your WL-2400 adapter will thereafter work on this configuration
under Windows NT. Press OK to continue.
E:\WL2400\
WISA Wireless LAN PnP Adapter
15
Advertisement
Table of Contents
