Ipv6 Multicast Routing And Forwarding Configuration Example; Network Requirements - HP 5920 series Configuration Manual

CAUTION:
The reset commands might cause IPv6 multicast data transmission failures.
Execute display commands in any view and reset commands in user view.
Task
Display information about IPv6 static
multicast MAC address table.
Display IPv6 multicast boundary
information.
Display information about the IPv6
multicast forwarding table.
Display information about the IPv6
multicast routing table.
Display the RPF route information of the
specified IPv6 multicast source.
Clear forwarding entries from the IPv6
multicast forwarding table.
Clear routing entries from the IPv6
multicast routing table.
NOTE:
When a forwarding entry is removed, the associated routing entry is also removed. When a routing entry
is removed, the associated forwarding entry is also removed.
IPv6 multicast routing and forwarding configuration
example
This section describes an example about how to configure IPv6 multicast forwarding over a GRE tunnel.

Network requirements

IPv6 multicast routing and IPv6 PIM-DM are enabled on Switch A and Switch C. Switch B does not
support IPv6 multicast. OSPFv3 is running on Switch A, Switch B, and Switch C.
Perform the configuration so that the receiver host can receive the IPv6 multicast data from the source.
Command
display mac-address [ mac-address [ vlan vlan-id ] | [ multicast ]
[ vlan vlan-id ] [ count ] ]
display ipv6 multicast boundary { group [ ipv6-group-address
[ prefix-length ] ] | scope [ scope-id ] } [ interface interface-type
interface-number ]
display ipv6 multicast forwarding-table [ ipv6-source-address
[ prefix-length ] | ipv6-group-address [ prefix-length ] |
incoming-interface interface-type interface-number |
outgoing-interface { exclude | include | match } interface-type
interface-number | slot slot-number | statistics ] *
display ipv6 multicast routing-table [ ipv6-source-address
[ prefix-length ] | ipv6-group-address [ prefix-length ] |
incoming-interface interface-type interface-number |
outgoing-interface { exclude | include | match } interface-type
interface-number ] *
display ipv6 multicast rpf-info ipv6-source-address
[ ipv6-group-address ]
reset ipv6 multicast forwarding-table { { ipv6-source-address
[ prefix-length ] | ipv6-group-address [ prefix-length ] |
incoming-interface { interface-type interface-number } } * | all }
reset ipv6 multicast routing-table { { ipv6-source-address
[ prefix-length ] | ipv6-group-address [ prefix-length ] |
incoming-interface interface-type interface-number } * | all }
121