Xerox DocumentCentre C400 Series User Manual page 21

Settings
Image Enhancement
Specify whether to use the Image Enhancement function.
Selecting On smoothes out boundaries when printing. This reduces jagged edges,
thereby artificially increasing the resolution of the image. When printing an image
(bitmap) composed of coarse halftone dots, smooth color gradation is impossible in
certain situations. In this case, select Off.
Draft Mode
Specify whether to reduce the amount of toner used when printing drafts.
When you select On, the overall printed color becomes lighter. This is best for printing
documents when print quality is not necessary.
Transparency Separators
Specify whether to use transparency separators and the source of the separators, if
selected.
Select Auto for the paper source to automatically feed from the paper tray with paper of
the same size and in the same orientation as transparencies.
When using Transparency Separators, be sure to load paper of the same size and in the same orientation
q
as transparencies into the paper tray.
The Transparency Separators function cannot be used in the following situations.
q
When anything other than Manual Feed is selected for Paper source in the Paper tab.
q
When anything other than Transparency is selected for Paper type in the Paper tab.
q
When anything other than Center Output Tray is selected for Output tray in the Paper tab.
q
When the Duplex feature is selected in the Paper tab.
q
Stapling
Specify whether to staple printed documents as well as the position of the staple.
You can staple 2 to 30 sheets.
q
You cannot use staples in the following situations.
q
When anything other than Finisher Tray is selected for Output tray in the Paper tab.
q
When Job Offset is selected.
q
2.3 Printer Driver Properties
2
13