Table of Contents
Advertisement
User Manual
About WL562(L)USB Utility
WL562(L)USB Utility is a software application used in tandem with the device to connect
to a wireless network and to configure the device settings. WL562(L)USB Utility can be
installed on computers running Windows 2000, XP, or Vista.
To connect to a wireless network:
1. Connect Wireless N USB adapter to a USB port.
2. When your device is detected, a new icon appears in the System tray
Double-click this icon to open WL562(L)USB Utility.
Network Tab
When starting RaUI, the system will connect to the AP with best signal strength without
setting a profile or matching a profile setting. When starting RaUI, it will issue a scan
command to a wireless NIC. After two seconds, the AP list will be updated with the
results of a BSS list scan. The AP list includes most used fields, such as SSID, network
type, channel used, wireless mode, security status and the signal percentage. The Check
icon indicates the connected BSS or IBSS network. The dialog box is shown in the below
figure.
Page 18 of 43
.
Advertisement
Table of Contents
