Aztech WL572USB Easy Start Manual

Device Overview

1

Check Package Contents

• WL572USB
• Easy Start Guide
• Resource CD - Driver and User Manual
Note: You may also download the Easy Start Guide,
Easy Start Guide
Utility Driver and User Manual by visiting this link:
WL572USB | High Speed Wireless-N 150 Mbps
http://www.aztech.com/support/
2
STEP

Remove or Disable Conflicts

C. Click Connections tab.
In Dial-up and Virtual Private Network settings,
To make sure the device installation moves on smoothly, D.
check 'Never dial a connection' .
you need to remove or disable conflicts that may interfere
with the installation. Probable conflicts may include: E. To close Internet Properties, click OK.
• Internet Sharing, Proxy, and Security Applications • Removing Temporary Internet Files
Internet sharing, proxy software and firewall
Temporary Internet files are files from Web sites that are
applications may interfere with the installation. These
stored in your computer. Delete these files to clean the
should be removed or disabled before starting the cache and remove footprints left by the Web pages you
installation.
visited.
• Configuring Internet Properties
A. Click the Start button and then click Run. This
opens the Run dialog box.
A.
Click the Start button, and then click Run. This opens
B. Type control and then click OK. This opens Control
the Run dialog box.
Panel.
B.
Type control inetcpl.cpl and then click OK. This
C. Double-click Internet Options. This opens Internet
opens Internet Properties.
Options.
D. In the Temporary Internet Files pane, click Delete B. Wizard will now move to next step for license
agreement. Check the option 'I Accept the terms of
Cookies.
E. Click Delete Files. the License agreement' .
F. To close Internet Properties, click OK.
3
STEP

Software Installation

Here are the instructions on how to install the driver
software for Windows 2000, XP, Vista, 7 and 8.
Note: Do not connect the device until the Utility is
completely installed.
C. Click Next.
To install the driver software:
D. Select either of the options available:
A. Insert the Resource CD to the CD-ROM. This opens the
c.1
WL572USB Utility Setup. If the Utility does not open
automatically, click the Start button and then click
c.2
Run. Enter d:\setup.exe where d is the CD-ROM drive.
Install driver and Ralink WLAN Utility; this will install
driver for the adapter and the wireless utility.
Install driver only; this will install only the driver for
the adapter.