Page 1
Easy Start Guide WL578USB WL578USB WL578USB WL578USB High Speed Wireless High Speed Wireless High Speed Wireless High Speed Wireless- - - - N N N N USB 2.0 Adapter USB 2.0 Adapter USB 2.0 Adapter USB 2.0 Adapter...
This device also supports connection to other wireless network standards like Wireless G or Wireless B. WL578USB is easy to setup - install the necessary driver software, connect it to an available USB slot, and then connect to a wireless network. The device comes with Windows-based software called “REALTEK 11n USB Wireless LAN...
Quick Installation Guide Getting Started Setting up the device is easy. The flowchart below provides an outline of the steps needed to complete the installation. Brief descriptions appear beside each step. Detailed instructions are provided in the subsequent pages. The package includes the Wireless Check Package N USB Adapter, Easy Start Guide, Contents...
User Manual Check Package Contents Make sure that you have the following items. If any of the items is damaged or missing, please contact your dealer immediately. WL578USB Easy Start Guide Resource CD – contains WL568USB Utility installer Device Overview...
Quick Installation Guide Internet Sharing, Proxy, and Security Applications Internet sharing, proxy software, and firewall applications may interfere with the installation. These should be removed or disabled before start the installation. If you have any of the following or similar applications installed on your computer, remove or disable them according to the manufacturer’s instructions.
WL578USB WL578USB WL578USB 1. Connect the Aztech WL578USB to Computer’s USB port. 2. Install the Driver found in the Resource CD on the computer where you wish to use Aztech WL578USB. a. a. Open Resource CD from your CD Rom Drive and select the folder for your operating system b.
Quick Installation Guide Connecting to wireless AP 1. Double click on “REALTEK 11n USB Wireless LAN Utility” found on the desktop after installing the CD. Page 10 of 24...
Page 11
User Manual 2. Select the wireless AP you wish to connect to under “Available Network” tab Page 11 of 24...
Page 12
Quick Installation Guide 3. Enter the password for the wireless AP and click “Add to Profile” Page 12 of 24...
Page 13
User Manual 4. Once connected it will show the status of your connection Page 13 of 24...
To connect using PBC, Push the WPS button on the WL578USB for 3 secs., then push the WPS button on your wireless router within 2 mins. You can use either the physical button or WPS simulation button found on the utility.
Page 15
Show Tray Icon Show Tray Icon Show Tray Icon Show Tray Icon Display icon on the system tray when utility is closed Radio Off Radio Off Radio Off Radio Off Disable wireless WL578USB adapter Page 15 of 24...
Page 16
Available for Win 7 nly Available for Win 7) ) ) ) nly Available for Win 7 Allowed other wireless client to connect to WL578USB wireless adapter Windows Zero Config (Only Available for Win XP) Windows Zero Config (Only Available for Win XP)
User Manual Use as an Access Point Share Internet connection coming from your Local Area Network connection with the use of WL578USB adapter. 1. Set the utility to AP mode 2. 2. 2. 2. Click Config Config Config Config to setup wireless Access Point settings...
Page 18
Quick Installation Guide 3. Enter SSID, Encryption and Password for the network, then click OK Page 18 of 24...
Page 19
User Manual 4. Tick Settings Internet Connection Sharing Settings Internet Connection Sharing Settings Internet Connection Sharing Settings Internet Connection Sharing (ICS) and select the Local Area Network you wish to share and Apply Apply Apply. Apply Page 19 of 24...
Quick Installation Guide Use as Virtual Wifi Configure WL578USB wireless adapter as Virtual WifFi to Share your Internet to mobile devices which cannot get the wifi signal from your main AP. 1. Disable built in Wifi in your computer if available...
Page 22
Quick Installation Guide 3. Virtual Wifi Virtual Wifi Virtual Wifi tab will appear on top. Virtual Wifi a. Start Virtual WiFi Soft AP Virtual WiFi Soft AP Virtual WiFi Soft AP Virtual WiFi Soft AP b. Click Confi Confi Confi Config g g g c.
Quick Installation Guide Safety Warnings For your safety, be sure to read and follow all warning notices and instructions. Do not open the device. Opening or removing the device can expose you to dangerous voltage points or other risks. Only qualified service personnel can service the device.