Aztech WL592USB Easy Start Manual

Device Overview
WPS Button
1
STEP
The following items are included in your WL592USB
package.
Easy Start Guide
Note: The Easy Start Guide, the Utility Driver and the
WL592USB | 450Mbps Wireless AC User Manual is included in the Resource CD and is also
downloadable on our Aztech Support Website (http://www.
Dual Frequency USB Adapter
aztech.com/support/).
2
STEP
Remove or Disable Conflicts
To make sure that the device installation will run
smoothly, you need to remove or disable conflicts that
may interfere with the installation. Probable conflicts
may include:
• Internet Sharing, Proxy, and Security Applications
Internet sharing, proxy software and firewall
Check Package Contents
applications may interfere with the installation.
These should be removed or disabled before
starting the installation.
• WL592USB
Easy Start Guide
• • Configuring Internet Properties
• Resource CD
A. Click the Start button, and then click Run. This
Warranty Card
•
opens the Run dialog box.
B.
Type control inetcpl.cpl and then click OK. This
opens Internet Properties.
C. Click Connections tab. D. In the Temporary Internet Files pane, click
D. In Dial-up and Virtual Private Network settings, Delete Cookies.
check 'Never dial a connection'. E. Click Delete Files.
Click OK to close the Internet Properties. F. To close Internet Properties, click OK.
E.
• Removing Temporary Internet Files 3
STEP
Temporary Internet files are files from Web sites
Here are the instructions on how to install the driver
that are stored in your computer. Delete these files
software for Windows Vista, 7 and 8.
to clean the cache and remove footprints left by the
Note: Do not connect the device until the Utility is
Web pages you visited.
completely installed.
A. Click the Start button and then click Run. This
To install the driver software:
opens the Run dialog box.
Insert the Resource CD to the CD-ROM. This opens
A.
B. Type 'control' and then click OK to open the
the WL592USB Utility Setup. If the Utility does not
Control Panel.
open automatically, click the Start button and then
C. Double-click Internet Options to open the
click Run. Enter d:\setup.exe where d is the CD-
Internet Options window.
ROM drive.
B. Wizard will now move to the next step, License
agreement. Choose the option 'I Accept the terms
of the License agreement'.
Software Installation
C. Click Next.
D. Select either of the options available:
c.1 Install driver and Ralink WLAN Utility; this
will install driver for the adapter and the
wireless utility.
Install driver only; this will install only the
c.2
driver for the adapter.