About Powerpacket Utility - Aztech Easy Start Manual

About PowerPacket Utility

PowerPacket Utility is a Windows-based software application used to manage and
monitor the activity of HomePlug devices.
System Requirements
Your computer must meet the following requirements:
• Windows Operating System: Windows 98SE, Windows Me, Windows 2000
Windows XP, or Windows Vista
• Pentium III 300 MHz MMX-Compatible PC or greater
• 128MB hard disk space and memory
• CD-ROM drive
Installation
To install:
1. Insert the Resource CD that comes with HomePlug Turbo into the CD-ROM drive.
2. If the installer does not launch automatically, select Start > Run, enter
D:\Setup.exe (where D: is your CD-ROM drive), and then click OK.
3. Follow the instructions on the Utility.
Opening PowerPacket Utility
Two ways to open PowerPacket Utility:
• Select Start > All Programs > PowerPacket > PowerPacket Ethernet Adapter >
PowerPacket Utility.
• Right-click the PowerPacket Utility desktop icon
Easy Start Guide
and then select Open.
Page 11 of 19