Related Manuals for Aztech WL552USB
Summary of Contents for Aztech WL552USB
- Page 1 Easy Start Guide Wireless N USB Adapter...
- Page 2 Quick Installation Guide 2009 © All rights reserved. Version 1.0 No part of this document may be reproduced, republished, or retransmitted in any form or by any means whatsoever, whether electronically or mechanically, including, but not limited to, by way of photocopying, recording, information recording, or through retrieval systems without the express written permission.
-
Page 3: Table Of Contents
User Manual Contents About the Product ...................... 4 Getting Started......................5 Check Package Contents................6 Using the USB Extension ..................6 Remove or Disable Conflicts ................ 6 Internet Sharing, Proxy, and Security Applications..........7 Configuring Internet Properties ................7 Removing Temporary Internet Files ................7 Installation ......................... -
Page 4: About The Product
This device also supports connection to other wireless network standards like Wireless G or Wireless B. WL552USB is easy to setup - install the necessary driver software, connect it to an available USB slot, and then connect to a wireless network. The... -
Page 5: Getting Started
User Manual Getting Started Setting up the device is easy. The flowchart below provides an outline of the steps needed to complete the installation. Brief descriptions appear beside each step. Detailed instructions are provided in the subsequent pages. The package includes the Wireless Check Package N USB Adapter, Easy Start Guide, Contents... -
Page 6: Check Package Contents
USB 1.0 variant. To use the USB Extension, connect one end to a USB 2.0 port in your computer, and then attach the WL552USB at the other end. Remove or Disable Conflicts To make sure the device installation moves on smoothly, you need to remove or disable conflicts that may interfere the installation. -
Page 7: Internet Sharing, Proxy, And Security Applications
User Manual Internet Sharing, Proxy, and Security Applications Internet sharing, proxy software, and firewall applications may interfere with the installation. These should be removed or disabled before start the installation. If you have any of the following or similar applications installed on your computer, remove or disable them according to the manufacturer’s instructions. -
Page 8: Installation
Note: Do not connect the device until the Utility is completely installed. To install the driver software: 1. Insert the Resource CD to the CD-ROM. This opens the WL552USB Utility Setup. If the Utility does not open automatically, click the Start button, and then click Run. - Page 9 User Manual 3. Click Next. 4. Select either of the options available: a. Install driver and Ralink WLAN Utility, this will install driver for the adaptor, and the wireless utility b. Install driver only, this will install only the driver for the adaptor. Page 9 of 20...
- Page 10 Quick Installation Guide 5. Click Next. 6. If you selected the first option, please select either one of the options available: a. Ralink Configuration Tool b. Microsoft Zero Configuration Tool Page 10 of 20...
- Page 11 User Manual 7. Click Next. 8. Click Install, required driver/utility is now being installed into the PC Page 11 of 20...
- Page 12 Quick Installation Guide 9. Click Finish to exit the wizard, installation is now complete. Page 12 of 20...
- Page 13 User Manual Page 13 of 20...
-
Page 14: Configuration
Quick Installation Guide Configuration This chapter describes how to configure WL552USB to get connected to your WLAN router. The adaptor’s configuration in windows XP is similar with windows 2000 and windows Vista. This user guide describes the configuration for windows XP. -
Page 15: Configuration
User Manual Configuration This chapter describes how to configure WL552USB to get connected to your WLAN router. The adaptor’s configuration in windows XP is similar with windows 2000 and windows Vista. This user guide describes the configuration for windows XP. -
Page 16: Connecting To Wep-Secured Wireless Ap
Quick Installation Guide 2. Click Connect Connecting to WEP-Secured Wireless AP 1. Select an AP with WEP encryption and click "Connect". 2. The Auth./Encry. function will appear as below Page 16 of 20... -
Page 17: Connecting To Wpa-Psk-Secured Wireless Ap
User Manual 3. Enter the key in the field as shown. The value must be the same as the key set in the Access Point. 4. Click OK. Connecting to WPA-PSK-Secured Wireless AP 1. Select an AP with WPA-PSK encryption and click "Connect". Page 17 of 20... - Page 18 Quick Installation Guide 2. The Auth./Encry. function will appear as below 3. Select WPA-PSK as the Authentication Type. Select TKIP or AES encryption. 4. Enter the key in the field as shown. The value must be the same as the key set in the Access Point.
- Page 19 User Manual 5. Click OK. Page 19 of 20...
-
Page 20: Safety Warnings
Quick Installation Guide Safety Warnings For your safety, be sure to read and follow all warning notices and instructions. Do not open the device. Opening or removing the device can expose you to dangerous voltage points or other risks. Only qualified service personnel can service the device.