Configuration; Connecting To Non-Secured Wireless Ap - Aztech WL562 User Manual

Configuration

This chapter describes how to configure WL562(L)USB to get connected to your WLAN
router.
The adaptor's configuration in windows XP is similar with windows 2000 and windows
Vista. This user guide describes the configuration for windows XP.
After installing the adaptor, the adaptor's tray icon will appear in your system tray. It
appears at the right hand side bottom of the screen. The icon will change color to reflect
current wireless network connection status. The status is shown as follows:
: Indicates the connected and signal strength is good.
: Indicates the connected and signal strength is normal.
: Indicates that it is not yet connected.
: Indicates that a wireless NIC cannot be detected.
: Indicates that the connection and signal strength is weak.

Connecting to non-Secured Wireless AP

1. Click Site Survey icon then select the AP desired.
User Manual
Page 15 of 43