Chapter 3 Configuration; Profile - Aztech WL230USB-L User Manual

Chapter 3 Configuration

Aztech WL230USB-L Wireless USB Adaptor can be configured by its utility. This section
describes how to configure your Wireless USB Adaptor for wireless connectivity on your Wireless
Local Area Network (WLAN) and use the data security encryption features.
After the Adaptor's driver and utility has been installed, the Adaptor's tray icon,
appear in your system tray. It means the utility is running on your system. If the utility does not run,
you can run the utility by clicking: Start> Program> Aztech> WL230USB-L WIRELESS
UTILITY> WL230USB-L Wireless Utility. If the icon still does not appear, the driver or utility may
be installed incorrectly or the Adaptor is unplugged, please try again.
Icon means the connection has been established. Icon
Double-click the
the utility by clicking: Start> Program> Aztech> WL230USB-L WIRELESS UTILITY>
WL230USB-L Wireless Utility. The utility provides a complete and easy to use set of tools to:
Display current status information
Edit and add configured profiles
Display current diagnostics information
The section below introduces these above capabilities.
Note:
If your OS is Windows XP, you can use Windows XP to configure the wireless network settings.
(To use this function, you must upgrade the OS with sp1).
If you want to use Windows XP to configure wireless network settings, just exit the utility.
Right-click the icon

3.1 Profile

Click the Profile tab of the utility and the Profile screen will appear, Figure 3.2. The Profile
screen provides tools to:
Add a Profile
Delete a profile
Edit a profile
Activate a profile
WL230USB-L
icon and the configuration screen of the utility will appear. You can also run
at the bottom of the screen, and click Exit to exit the utility.
54Mbps Wireless 802.11b/g USB 2.0 Adaptor
- 9 -
or
means there is no connection.
, will