Using Close Call - Uniden UH8080NB Owner's Manual

Operation - Special Features

Using Close Call

To start or stop Close Call RF Capture:
1. Press [CLOSE CALL].
The C-C icon appears and C.CALL is displayed when Close Call RF Capture
mode.
display. Press any key (except CLOSE CALL key) when CC FOUND is displayed to
show the frequency. The signal strength is also displayed with CC FOUND display.
Lockout an Undesired Frequency
If the signal frequency is undesired (for instance it is a data channel) then the
frequency can be added to the lockout list and ignored in future.
1. First press [HOLD] to stay on that frequency.
2. And then press and hold [HOLD] to lockout that frequency and resume Close Call
RF Capture mode.
Unlock a Locked out frequency
1. The locked out frequencies can be reviewed by pressing [MENU].
2. Press /
3. Press and hold [HOLD] to unlock the currently displayed frequency.
Two beeps sound.
4. Press [MENU] to resume Close Call RF Capture mode.
the same time as SCAN or normal receive mode.
NOTE
UNIDEN UH8080NB
to view other frequencies in the list.
31
UHF CB Transceiver