Selecting A Channel; Channel Banks - Using The Police Button - Uniden UH8080NB Owner's Manual

Operation

Selecting a Channel

Press / to select the desired channel.

Channel Banks - Using the POLICE Button

The UH8080NB has three banks (groups) of
channels to select from;
CB
POL Pre-programmed Police frequencies²
FIRE
When the CB icon is showing the 80 UHF-CB and any
user programmed RX channels will be available for
selection or scanning. The 80 UHF-CB channels are
numbered 01-80. The user programmable RX channels are numbered 81-180 and only
When the POL icon is showing then pre-programmed police frequencies will be
available. When the FIRE
and FI
1. Press [POLICE] to select the desired channel bank(s) combination.
The channel banks can be selected as follows;
---- CB ----
POL ---- ----
---- ---- FIRE
POL ---- FIRE
POL CB ----
---- CB FIRE
POL CB FIRE
in 12.5kHz steps.
NOTE
frequencies and guidelines for their use is printed on p.43 - p.45. For
UNIDEN UH8080NB
PO appears in the channel display for a police frequency
14
UHF CB Transceiver