Connecting The Microphone - Uniden UH8080NB Owner's Manual

Connecting the Microphone

MIC Jack
Extension Cable - simply connect the MIC plug into the jack end of the Extension
Cable
Push the MIC plug or Extension Cable plug into the MIC jack of the radio until the
connection locks into place. Gently tug the MIC or Extension Cable cord to test that the
connection is locked. Use the rubber cover which is on the cord to seal the MIC jack
entry from dust.
Connect the Remote LCD Speaker MIC only to the microphone jack
nearest the end. The spare (covered) jack is for future expansion and
should not be used.
NOTE
Disconnecting the MIC from the MIC Jack
screwdriver or similar object carefully push the lock tab of the MIC plug towards the
MIC cord and at the same time tug on the MIC cord to draw back the MIC plug.
UNIDEN UH8080NB
9
UHF CB Transceiver