Operation - Special Features
Lead-in Delay Programming
1. Power Off the UH8080NB.
2. Press and hold [POWER] and [MENU]. The SELCALL Settings Menu will display (no
tone will sound).
3. Press [MENU] repeatedly to select the Lead-in Delay setting - which is indicated on
the display as Ld.
4. Press [SQL]
5. Press
/
6. Press [SQL] to exit the setting.
7. Press and hold [ENTER]
Lead-in Tone
the Lead-in Delay. The main purpose of the Lead-in Tone is to increase the probability of
contact between your unit and another radio when TSQ Scanning.
1. Power Off the UH8080NB.
2. Press and hold [POWER] and [MENU]. The SELCALL Settings Menu will display (no
tone will sound).
3. Press [MENU] repeatedly to select the Lead-in Tone setting - which is indicated on the
display as LT.
4. Press [SQL]
5. Press
/
NOTE
6. Press [SQL] to exit the setting.
7. Press and hold [ENTER]
UNIDEN UH8080NB
to select the desired Lead-in Tone.
39
UHF CB Transceiver