Sanyo PLC-WXU30 Owner's Manual page 205

4
Auto Display setting and control page [3]
Display time* 1 of the
image (3 to 240 sec.)
Error info.
1. Click Start button to start the auto-display. The image in the selected folder or program is dis-
played on the projector's screen. The web browser opens another window and displays the pre-
view images on the Auto Control window sequentially.
2. Click Stop button to stop the auto-display.
• Restart the auto-display, click Restart button.
* When the auto-display stops, it enables you to display the images manually by using
button.
3. Click End button to end the auto-display.
• When the Error button is pressed, the further information of the file error is displayed.
For further error information, refer to the next page.
*1 When the program file for auto-display is selected, the display time of each image gives preference to the
setting specified by the program file over the setting specified by the auto-display function above. The
images for which the display time is not set shows the display time specified by the auto-display function
above.
The display time is greatly affected by the network environment or the operation of multi control, so the
image may not be displayed as the specified display time.
The timing to switch images is not the same on the screen and on the web browser.
Using the network viewer function
Repeat times
(0 to 255 times)
* 0 means endless play
Click here to check the
further information of
the file error
The preview image will not
appear when the option is set
"Display OFF".( p.121)
[<<] or [>>]
123