Chapter 4 Wired LAN configurations
Network PIN code
The Network PIN code is to restrict the access from the networks to the projector.
After setting the Network PIN code, you need to enter it to operate the projector via the networks.
1. Select Network PIN code menu, and press SELECT button.
The Network PIN code screen will appear.
2. Set the Network PIN code.
Set the figures with the Point
Select "Set" and press SELECT button to set. To cancel the preset Network PIN code, select "Cancel".
When you do not want to set the Network PIN code, set
It is recommended to set the Network PIN code if you use the projector via the networks. You can also
change the Network PIN code. See "6. Basic setting and operation"
code setting" (p49).
Network PIN code
Network information
Select Network information from the projector menu and press SELECT button to show LAN setting
environment of the currently selected projector. (The description below is an example and different
from what will be shown.)
Wired factory default
Select "Wired factory default" from the projector menu and press SELECT button. All the LAN settings will
go back to the factory default settings. For details, refer to "Wired LAN factory default settings" (p.31).
30
buttons and move to the next items with the Point
Network information
Wired factory default
(See the menu above.)
Network information
MAIN PROGRAM:
V1.000
MAC ADDRESS:
08007B650056
IP ADDRESS:
172.21.95.202
(See the menu above.)
"
"
0000
.
"Initial setting"
Network PIN code screen
buttons.
"Network PIN