Sanyo PLC-WXU30 Owner's Manual page 162

Chapter 7 Controlling the projector
Start/stop the multi control
To start or stop controlling the multi-projectors, click Multi con-
trol setting menu and select ON or OFF.
Multi control setting
OFF ..........Stops multi control function
ON............Starts multi control function. The multi control
menu will appear when ON is set. These items of
menu are linked to the main menu.
80
The multi controllable menus are "Power & Status", "PC adjust-
ment", "Control", "Setting", "E-mail setting", "Timer", "SNMP set-
ting" and "Network Viewer". Click each menu and perform set-
ting and adjustment.
The word "MULTI CONTROL" appears on the each control page
while the multi control is operating.
This shows the multi control
is operating now.
Switches on and off the
multi-control function