Sanyo PLC-WXU30 Owner's Manual page 157

2
Set an execute time
Type the time with (Hour:Minute) and 24 hours format.
Ex.: Type [18:25] if you specify [PM 6 o'clock and 25 minutes].
3
Select an event action
Select an event action from the pull-down menu.
Event Action
ON.................................. Turns on the projector
OFF ................................ Turns off the projector
Lamp Auto .................. Changes lamp mode to "Auto"
Lamp High .................. Changes lamp mode to "High"
Lamp Normal ............. Changes lamp mode to "Normal"
Lamp Eco..................... Changes lamp mode to "Eco"
4
Register an event
Click Set button to register the set timer event. Repeat steps 1 to 4 for another timer event setting.
Check the timer events
To check the set timer events, click
events are listed. The event with blue background color rep-
resents the timer-OFF event.
Change the event mode
On the event list appearing by clicking Check button, click on the
event you want to delete, disable or enable. Click Cancel, Delete,
Timer ON or Timer OFF button on the popup pallet.
Button Operation
Cancel ........................Cancels the setting
Delete ........................Deletes the timer event
Timer OFF.................Disable the timer event temporarily
Timer ON...................Enable the timer event
button. The timer
Check
Timer setting
75