Throttle Control; Brake Pedals - Toro 30856 Operator's Manual

1. Traction pedal
2. Forward speed control
3. Key switch
4. Engine oil pressure
warning light
Speed Limiter Screws
Adjust the screw(s) (Figure 6) to limit the amount the
traction pedal can be depressed in the forward or reverse
direction to limit speed.
Important: The speed limiter screw must stop the
traction pedal before the pump reaches full stroke
or damage to the pump may occur.
1. Forward speed limiter
screw

Brake Pedals

Two foot pedals (Figure 7) operate individual wheel
brakes for turning assistance, parking, and to aid in
Figure 5
5. Charge indicator
6. Engine coolant
temperature warning
light
7. Glow plug indicator light
Figure 6
2. Reverse speed limiter
screw
obtaining better side hill traction. A latch connects the
pedals for parking brake operation and transport.
1. Brake pedals
2. Pedal locking latch
Pedal Locking Latch
The pedal locking latch (Figure 7) connects the pedals
together to engage the parking brake.
Parking Brake Latch
A knob on the left side of the console actuates the
parking brake lock (Figure 7). To engage the parking
brake, connect the pedals with the locking latch, push
down on both pedals, and pull the parking brake latch
out. To release the parking brake, depress both pedals
until the parking brake latch retracts.

Throttle Control

Move the control (Figure 8 or Figure 9) forward to
increase the engine speed and rearward to decrease the
speed.
16
Figure 7
3. Parking brake latch