Greasing The Machine; Checking Fluid Levels; Reading The Manuals And Viewing The Training Material - Toro 30856 Operator's Manual

Important: Make sure that the seat switch is
connected to the seat switch connector on the
harness.
3. Slide the seat completely forward and backward to
ensure proper operation and that seat switch wires
and connectors are not pinched or do no contact any
moving parts.
2

Greasing the Machine

No Parts Required
Procedure
Before the machine is operated, it must be greased to
ensure proper lubrication. Refer to Lubrication section.
Failure to properly grease the machine will result in
premature failure of critical parts.
3

Checking Fluid Levels

No Parts Required
Procedure
1. Check the rear axle lubricant level before the engine
is first started, refer to Checking the Rear Axle
Lubricant in Drive System Maintenance.
2. Check the hydraulic fluid level before the engine is
first started, refer to Checking the Hydraulic Fluid
Level in Operation.
3. Check the engine oil level before and after the engine
is first started, refer to Checking the Engine Oil
Level in Operation.
4
Reading the Manuals and
Viewing the Training Material
Parts needed for this procedure:
2 Operator's Manual
1 Engine Operator's Manual
1 Parts Catalog
1 Operator Training Material
Procedure
1. Read the manuals.
2. View the training material.
3. Store the documentation in a safe place.
14