Declaration Of Conformity; Functional Description - Bosch PSR 12-2 Original Instructions Manual

Hide thumbs Also See for PSR 12-2:

page of 113

/ 113
Contents
Table of Contents
Bookmarks

Table of Contents

Available languages

OBJ_BUCH-213-002.book Page 16 Tuesday, November 17, 2009 2:35 PM

16 | English

Switch off the power tool immediately

when the tool insert jams. Be prepared for

high reaction torque that can cause kick-

back. The tool insert jams when:

— the power tool is subject to overload or

— it becomes wedged in the workpiece.

Hold the machine with a firm grip. High re-

action torque can briefly occur while driving

in and loosening screws.

Secure the workpiece. A workpiece clamped

with clamping devices or in a vice is held

more secure than by hand.

Keep your workplace clean. Blends of mate-

rials are particularly dangerous. Dust from

light alloys can burn or explode.

Always wait until the machine has come to

a complete stop before placing it down. The

tool insert can jam and lead to loss of control

over the power tool.

Do not open the battery. Danger of short-

circuiting.

Protect the battery against heat, e. g.,

against continuous intense sunlight,

fire, water, and moisture. Danger of

explosion.

Use only original Bosch batteries with the

voltage listed on the nameplate of your

power tool. When using other batteries, e. g.

imitations, reconditioned batteries or other

brands, there is danger of injury as well as

property damage through exploding batter-

ies.

Functional Description

Read all safety warnings and all

instructions. Failure to follow the

warnings and instructions may

result in electric shock, fire and/or

serious injury.

Intended Use

The machine is intended for driving in and loos-

ening screws as well as for drilling in wood, met-

al, ceramic and plastic.

1 609 929 T04 | (17.11.09)

Product Features

The numbering of the product features refers to

the illustration of the machine on the graphics

page.

1 Keyless chuck

2 Torque preselection ring

3 Gear selector

4 Indicator for right rotation

5 Indicator for left rotation

6 Screwdriver bit*

7 Battery unlocking button

8 Battery*

9 "Power Light"

10 Rotational direction switch

11 On/Off switch

12 Handle (insulated gripping surface)

13 Universal bit holder*

14 Securing screw for keyless chuck

15 Allen Key**

*Accessories shown or described are not part of the

standard delivery scope of the product. A complete

overview of accessories can be found in our acces-

sories program.

**Commercially available (not included in the deliv-

ery scope)