Component Video Input Setup; Digital Input Setup - Onkyo HT-R518 Instruction Manual

HT-R518_En.book Page 37 Tuesday, March 11, 2008 11:31 AM
First Time Setup —Continued

Component Video Input Setup

If you connect a video component to a COMPONENT
VIDEO IN, you must assign that input to an input
selector. For example, if you connect your DVD player
to COMPONENT VIDEO IN 2, you must assign COM-
PONENT VIDEO IN 2 to the DVD input selector.
By default, the DVD input selector is assigned to COM-
PONENT VIDEO IN 1, and all of the other input selec-
tors (i.e., VCR/DVR, CBL/SAT, AUX) are assigned to
the "- - -" option.
1 Press the [RECEIVER] button,
followed by the [SETUP] button.
2
Use the Up and Down [
buttons to select "2.Component,"
and then press [ENTER].
3
Use the Up and Down [
buttons to select an input selec-
tor, and use the Left and Right
[ ]/[ ] buttons to select:
IN1: Select if the video component
is connected to COMPO-
NENT VIDEO IN 1.
IN2: Select if the video component
is connected to COMPO-
NENT VIDEO IN 2.
No: Select if you're not using the
COMPONENT VIDEO
OUT.
4
Press the [SETUP] button.
Setup closes.
Note:
• This procedure can also be performed on the AV
receiver by using its [SETUP], [ENTER], and arrow
buttons.

Digital Input Setup

ON/STANDBY
STANDBY
PURE AUDIO
PURE AUDIO MULTI CH
PHONES
CINEMA
FILTER LATE NIGHT
If you connect a component to a digital audio input, you
must assign that input to an input selector. For example,
if you connect your CD player to OPTICAL IN 1, you
must assign OPTICAL IN 1 to the CD input selector.
These are the default assignments.
Input selector
DVD
VCR/DVR
]/[ ]
CBL/SAT
AUX
TAPE
CD
1
DVD VCR/DVR CBL/SAT
]/[ ]
AUX TAPE TUNER
CD
2
DIGITAL INPUT
3
DIGITAL INPUT
TUNING PRESET
ENTER
DVD VCR/DVR CBL/SAT AUX TAPE TUNER CD SETUP RETURN
AUX INPUT
SETUP MIC VIDEO L AUDIO
TONE MOVIE/TV MUSIC GAME DISPLAY DIGITAL INPUT RT/PTY/TP MEMORY TUNING MODE
CLEAR
AV RECEIVER
1 2, 3
Audio input
COAX1
OPT1
COAX2
- - - -
- - - -
OPT2
Press the input selector button
for the input selector that you
want to assign.
The TUNER input selector cannot be
assigned and is fixed at the "- - -"
option.
Press the [DIGITAL INPUT]
button.
The current assignment is displayed.
Press the [DIGITAL INPUT] but-
ton repeatedly to select an
option.
COAX1 : Select if the component is
connected to DIGITAL IN
COAXIAL 1.
COAX2 : Select if the component is
connected to DIGITAL IN
COAXIAL 2.
OPT1 : Select if the component is
connected to DIGITAL IN
OPTICAL 1.
MASTER VOLUME
R
HT-R518
37