CONNECTING TO VIDEO EQUIPMENT
Connecting to DVD
Connect COMPONENT1 or COMPONENT2 (Y/Pb/Pr) ports of the projector to
Component port on the rear side of DVD using Component Cable.
Viewing the picture
COMP.1
1
COMP.2
2
24
Downloaded From projector-manual.com Samsung Manuals
Rear side of Projector
DVD
Turn on the projector and press the
1
button to select Component1.
Press the COMP.2 button to select
2
Component2 if COMPONENT2 is connected.
I
When Component Mode is not available, check that
the component cables are in place.
Component Ports are marked as (Y, Pb,Pr),
(Y, B-Y, R-Y) or (Y, Cb, Cr) depending on
NOTE
the manufacturer.
Component Cable
COMPONENT VIDEO OUT
AUDIO OUT
S-VIDEO OUT
Rear Connection
COMP.1
Component1