Connecting To Pc - Samsung SP-H700 Owners Instrucitons

Connecting to PC

You can connect a PC to the projector and use it as a monitor.
Using PC Video Cable or DVI Cable
Connect PC (RGB In) port on the rear side of the projector to the monitor output port
1
of PC using PC video cable.
I
If PC has a DVI output port, connect it to DVI port of the projector.
This product supports Plug & Play. No driver installation is needed for Windows XP.
NOTE
Viewing the PC Screen
PC
1
60
Downloaded From projector-manual.com Samsung Manuals
Rear side of Projector
DVI-D Video
Cable
or
1 Turn on the projector and press the PC button
to select PC. If the projector is connected to
DVI, press the DVI button to select DVI.
I
If PC Mode is not available, check PC video cable is
in place.
Turn on the PC and set the PC Environment
2
when necessary. (Page 59)
Adjust the screen. (Pages 62~65)
3
I
Enjoy better picture quality by using DVI-D cable (supports digital signals only)
instead of PC Video cable.
NOTE
I
DVI-I cable (supports analog signals) is not supported. Use DVD-D cable.
I
Sound comes out from PC speakers.
Rear Connection
PC Video
Cable
DVI-D Port
PC