Connecting To Dvd; Connecting To The Digital Tv Receiver - Samsung SP-H700 Owner's Instructions Manual

CONNECTING TO VIDEO EQUIPMENT

Connecting to DVD

DVD
Connect COMPONENT1 or COMPONENT2 (Y/Pb/Pr) ports of the projector to
Component port on the rear side of DVD using Component Cable.
Viewing the picture
Turn on the projector and press the COMP.1
1
COMP.1
button to select Component1.
1
COMP.2
2 Press the COMP.2 button to select
2
Component2 if COMPONENT2 is connected.
When Component Mode is not available, check that
the component cables are in place.
Component Ports are marked as (Y, Pb,Pr),
(Y, B-Y, R-Y) or (Y, Cb, Cr) depending on
NOTE
the manufacturer.
24
Rear side of Projector
Component Cable
COMPONENT VIDEO OUT AUDIO OUT
S-VIDEO OUT
Rear Connection
Component1
CONNECTING TO VIDEO EQUIPMENT

Connecting to the Digital TV Receiver

Rear side of Projector
DVI Video Cable
or
Digital TV Receiver
(Set-Top Box)
Connect antenna cable to antenna
1
signal input terminal of the receiver.
Viewing the picture
Turn on the projector and press the COMP.1
1
COMP.1
1
button to select Component1.
COMP.2
2
2 Press the COMP.2 button to select
PC Component2 if COMPONENT2 is connected.
DVI
If the receiver is connected to DVI or PC port,
press the DVI or PC button to select DVI or PC
respectively.
When Component Mode is not available, check that
the component cables are in place.
PC Video Cable
Component Cable
Rear Connection
Connect COMPONENT1 or
COMPONENT2 (Y/P /P ) port of the
b r
projector to Component port of the
2
receiver using Component Cable.
If the receiver has DVI or PC OUT port,
you can connect it to DVI or PC input
port of the projector.
Component1
DVI
25