Before Contacting Service Personnel - Samsung SP-H700 Owners Instrucitons

Before Contacting Service Personnel

If this projector does not operate properly, check the following first.
If the problem is continues, contact your dealer.
Installation and Connection
Symptoms
No Power.
Image is distorted or
trapezoidal.
Want to install
projector on ceiling.
Image is distorted or
trapezoidal.
Menu and Remote Control
Symptoms
Remote control does
not work.
Some of Menu functions
do not work.
68
Downloaded From projector-manual.com Samsung Manuals
Troubleshooting
Be sure that the power cord in place and the power switch
on the rear side of the projector is turned on "-".
Be sure to make the projection beam perpendicular to the
screen and adjust the focus using the Zoom Knob and the
Focus Ring. Avoid to use the
Ceiling bracket is an optional accessory.
Please contact your dealer.
Be sure that the connection cable (video) is properly
connected to the proper port. Unless they are connected
properly, the device is not available.
Troubleshooting
I Be sure that the proper external source is selected.
I
Check batteries of the remote control. If there is a
problem, replace them with recommended ones.
I
Check the angle and distance between the remote control
and the projector. Be sure that there is no obstacle
between the projector and the remote control that may
block the signal.
I
Direct lighting of 3-way light bulbs or other lighting
device on the remote sensor of the projector may affect the
sensitivity and cause the remote control to malfunction.
Refer to the user manual. Some functions are locked
depending on sources and type of the input signal.
V-Keystone function if possible.
Note
Page 15
Pages
16~20
Pages
23~25
Note
Page 26
Page 12
Page 13
Pages
23~26