Onkyo TX-SR707 Instruction Manual page 97

Advanced Setup—Continued
HDMI Control (RIHD)
This function allows
receiver.
Notes:
• , which stands for Remote Interactive over HDMI, is the name of the system control function found
on Onkyo components. The AV receiver can be used with CEC (Consumer Electronics Control), which
allows system control over HDMI and is part of the HDMI standard. CEC provides interoperability between
various components, however, operation with components other than
not be guaranteed.
When set to "On" and close the menu, the name of connected
"RIHD On" are displayed on the AV receiver.
→
"Search..." "(name)"
When the AV receiver cannot receive the name of the component, it is displayed as "Player*" or
"Recorder*", etc ("*" means the number of two or more component).
When set to "Off" and close the menu, "RIHD Off" are displayed on the AV receiver.
→
"Disconnect"
• Set it to Off when a connected piece of equipment is not compatible or it is unclear whether the equipment
" "
is compatible or not.
• Set it to "Off" if the operation is not successful.
• Refer to the connected component's instruction manual for details.
Power Control
To link the power functions of
This setting is set to "On" automatically when the above "HDMI Control (RIHD)" is set to "On" for the first
time.
Notes:
• The
"Power Control"
• HDMI power control only works with
properly with some components due to their settings or compatibility.
• When set to "On", the power consumption on standby mode increases.
• When set to "On", regardless of whether the AV receiver is On or on Standby, both audio and video received
by an HDMI input will be output by the HDMI OUT for playback on the TV or other component that's
connected to the HDMI OUT.
• Refer to the connected component's instruction manual for details.
TV Control
Set to "On" when you want to control the AV receiver from an
HDMI.
Notes:
• Do not assign the component connected with the HDMI input to the TV/TAPE selector when you set "TV
Control" setting to "On". Otherwise, appropriate CEC (Consumer Electronics Control) operation is not guar-
anteed.
• Set to Off when the TV is not compatible or when it is unclear whether the TV is compatible or not.
" "
• The
"TV Control"
settings are both set to "On".
• Refer to the connected component's instruction manual for details.
Note:
After changing the settings of the
nected pieces of equipment to Standby and then turn them on again. Refer to the User's Manuals for all
connected pieces of equipment.
On: enabled.
Off: disabled (default).
-compatible components connected via HDMI to be controlled with the AV
→
"RIHD On"
"RIHD Off"
On: Power Control enabled.
Off: Power Control disabled.
-compatible components connected via HDMI, select "On".
setting can be set only when the above
On: TV Control enabled.
Off: TV Control disabled.
setting can be set only when the above
HDMI Control (RIHD)
"
-compatible components and
HDMI Control (RIHD)
"
-compatible components that support it and may not work
-compatible TV that is connected to
HDMI Control (RIHD)
"
, , or
" "Power Control"
-compatible components can-
setting is set to "On".
"
and
" "Power Control"
, set all con-
"TV Control"
97