Onkyo TX-SR707 Instruction Manual page 109

Controlling Other Components—Continued
5 Use the Up and Down [q]/[w] but-
tons to select category, and then
press [ENTER].
The brand name input panel appears.
8–1. Remote Mode Setup
Category
Brand
A B C
N O P
1 2 3
6
Use the arrow [q]/[w]/[e]/[r] but-
tons to select a character, and
then press [ENTER].
Repeat this step from the 1st character
to the 3rd character of the brand name.
When you have entered the 3rd charac-
ter, select "Search" and press
[ENTER].
After searching, a list of the brand
name appears.
8–1. Remote Mode Setup
Category
Brand
Sonawa
Sonber
Songba
Sonic
Soniko
If the brand name is not found:
Use the Right [r] button to select
"Not Listed", and then press
[ENTER].
The brand name input panel appears.
7
Use the Up and Down [q]/[w] but-
tons to select brand, and then
press [ENTER].
After searching, a remote control code
and the input procedure appear. Try it.
8–1. Remote Mode Setup
Code
1. While holding down Remote Mode [TV],
press and hold down [DISPLAY] (3 seconds).
2. Enter the 5-Digit remote control code.
3. Push some key to see if the TV responds.
4. Push Remote Mode [RECEIVER].
5. Choose "Works" or "Doesn't work".
Works
Doesn't Work (try next Code)
TV
TV
D E F G H I J K L M
Q R S T U V W X Y Z
4 5 6 7 8 9 0 – & @
Space Back Space
Search
TV
TV
SON
Not Listed
TV
xxxxx
8
If you can control component,
press the [RECEIVER] button,
use the Up and Down [q]/[w] but-
tons to select "Works", and then
press [ENTER].
The "Remote Mode Setup" menu
appears.
If you cannot control component,
use the Up and Down [q]/[w] but-
tons to select "Doesn't work (try
next Code)" and press [ENTER].
The next code is appear.
9 When you've finished, press the
[SETUP] button.
The setup menu closes.
109