Onkyo TX-SR707 Instruction Manual page 96

Advanced Setup—Continued
HDMI
Audio TV Out
This preference determines whether audio received at the HDMI IN is output by the HDMI OUT. You may
want to turn this preference on if your TV is connected to the HDMI OUT and you want to listen to the audio
from a component that's connected to an HDMI IN, through your TV's speakers. Normally, this should be set
to "Off".
Notes:
• If On is selected and the signal can be output by the TV, the AV receiver will output no sound through its
" "
speakers.
• If "On" is selected, "TV Speaker On" appears on the Display by pressing the [DISPLAY] button.
• When " TV Control
• With some TVs and input signals, no sound may be output even when this setting is set to
try to get audio from your TV, signals from the source component may be converted to the format supported
by your TV.
• When the "Audio TV Out" setting is set to
-compatible TV (see page 25), by controlling the AV receiver's volume, the AV receiver's speakers
will produce sound while the TV's speakers are muted. If your TV is not compatible with
volume level will not change. To stop the AV receiver's speakers producing sound, change the settings,
change your TV's settings, or turn down the AV receiver's volume.
• When the "Audio TV Out" setting is set to "On", the remote controller's [AUDIO] button is disabled.
Lip Sync
The AV receiver can be set to automatically correct any delay between the video and the audio, based on the
data from the connected monitor.
Notes:
• This function works only if your HDMI-compatible TV supports HDMI Lip Sync.
• You can check the amount of delay being applied by the HDMI Lip Sync function on the A/V Sync screen
(see page 88).
x.v.Color
If your HDMI source and HDMI-compatible TV both support the "x.v.Color", you can enable "x.v.Color" on
the AV receiver with this setting.
Notes:
• If the color is unnatural when "x.v.Color" is set to "Enable", change the setting to
• Refer to the connected component's instruction manual for details.
96
Off: HDMI audio is not output to TV (default).
On: HDMI audio is output to TV and the sound will be heard from the TV
speakers.
" is set to " On " , this setting is fixed at
On
"
Disable: HDMI Lip Sync disabled (default).
Enable: HDMI Lip Sync enabled.
Disable: "x.v.Color" disabled (default).
Enable: "x.v.Color" enabled.
" Auto " .
or TV Control" is set to
" "
On . When you
" "
On to hear from speakers of
" "
, the
.
"Disable"