Servicing The Emissions Filter; Electrical System Maintenance; Servicing The Battery - Toro 74840 Operator's Manual

3
G008963
Figure 44
1. Fuel filter
2. Hose clamp
6. Remove the filter from the fuel lines.
7. Install a new filter with the flow direction arrow
coming from the fuel tank and pointing to the
engine. Move the hose clamps close to the filter
(Figure 43) to secure it in place.

Servicing the Emissions Filter

Service Interval: Every 100 hours/Yearly (whichever
comes first)
The machine is equipped with a emissions filter
(Figure 43) connected to a tee fitting on the vent line
coming from the gas tank. The filter has an open port by
design. The filter should be inspected regularly. Replace
the filter if the filter is dirty or clogged.
1 2
3. Fuel line
Electrical System
Maintenance

Servicing the Battery

Service Interval: Monthly
CALIFORNIA
Proposition 65 Warning
Battery posts, terminals, and related
accessories contain lead and lead compounds,
chemicals known to the State of California
to cause cancer and reproductive harm.
Wash hands after handling.
DANGER
Battery electrolyte contains sulfuric acid which is a
deadly poison and causes severe burns.
Do not drink electrolyte and avoid contact with
skin, eyes or clothing. Wear safety glasses to shield
your eyes and rubber gloves to protect your hands.
Removing the Battery
WARNING
Battery terminals or metal tools could short against
metal machine components causing sparks. Sparks
can cause the battery gasses to explode, resulting
in personal injury.
• When removing or installing the battery, do not
allow the battery terminals to touch any metal
parts of the machine.
• Do not allow metal tools to short between
the battery terminals and metal parts of the
machine.
38
WARNING