Change The Remote Access Pin/Passcode; Charge The Handset; Check The Battery Level - Philips D630 Extended User Documentation

Note
•
If the time is in 12-hour format, press
or [pm] (Country dependent).
6
Press [OK] to confirm.
Set the date and time format
1
Select [Menu].
2
Press / to select
[Select].
3
Select [Date & time], then press [OK] to
confirm.
4
Select [Date format] or [Time format].
5
Press / to select [DD-MM-YYYY] or
[MM-DD-YYYY] as the date display, and
[12 Hours] or [24 Hours] as the time
display. Then press [OK] to confirm.
» The setting is saved.
Note
•
The date and time format setting is country dependent.
Change the remote access
PIN/passcode
Note
•
The default answering machine remote access PIN/
passcode is 0000 and it is important to change it to
ensure the security.
1
Select [Menu].
2
Press / to select
[Select].
3
Select [Remote access] > [Change PIN],
then press [OK] to confirm.
4
Enter the old PIN/passcode, then press
[OK] to confirm.
to select [am]
, then press
, then press
5
Enter the new PIN/passcode, then press
[OK] to confirm.
6
Enter the new PIN/passcode again, then
press [Save] to confirm.
» The setting is saved.

Charge the handset

Place the handset on the base station to
charge the handset. When the handset is
placed correctly on the base station, you hear a
docking sound.
» The handset starts charging.
Note
•
Charge the batteries for 8 hours before first use.
•
If the handset becomes warm when the batteries are
being charged, it is normal.
Your phone is now ready to use.

Check the battery level

The battery icon displays the current battery
level.
EN 9