Change The Remote Access Pin Code (For M355); Charge The Handset - Philips Linea V M355 Extended User Documentation

To reset the language, see the
following steps.
1
Select MENU/OK > [Phone setup] >
[Language], then press MENU/OK
to confirm.
2
Select a language, then press
MENU/OK to confirm.
» The setting is saved.
Set the date and time
1
Press MENU/OK.
2
Select [Phone setup] > [Date &
time], then press MENU/OK to
confirm.
3
Press the numeric buttons to enter
the date, then press MENU/OK to
confirm.
» The time setting menu is
displayed on the handset.
4
Press the numeric buttons to enter
the time.
• If the time is in 12-hour format,
press
or [pm] (Country dependent).
5
Press MENU/OK to confirm.
/ to select [am]
Change the remote
access PIN code (for
M355)
Note
•
The default answering machine remote
access PIN code is 0000 and it is important
to change it to ensure the security.
1
Press / or MENU/OK > [Answer
machine].
2
Select [Remote access] > [Change
PIN], then press MENU/OK to
confirm.
3
Enter the old PIN/passcode, then
press MENU/OK to confirm.
4
Enter the new PIN/passcode, then
press MENU/OK to confirm.
5
Enter the new PIN/passcode again,
then press MENU/OK to confirm.
» The setting is saved.

Charge the handset

Charge your handset by docking it in
either direction. When the handset is
placed correctly on the base station,
you hear a docking tone (see 'Set the
docking tone' on page 23). The
LED at the
back of the handset flashes once.
» The handset starts charging.
EN
9