Important safety instructions Warning When using the phone as a baby monitor with the baby unit may be lost. Move the baby monitor further away from the other wireless • The Electrical network is classified as hazardous. • Children should be supervised to ensure that they appliances until the connection is restored.
Page 3
Overview In call In menu Display icons Display icons The number of bars indicates the connection Enter the option menu Confirm / Enter the option menu / Select status between the handset and base station. The Adjust the volume Cancel Earpiece more bars are shown, the better the signal strength End calls Up / down Turn the speaker on/off...
Get started Insert batteries Charge your phone Configure your phone 1 Set the country and language if prompted. Charge 8 hours 2 Set the date and time. • If the time is in 12-hour format, press to select > 84% 36% - 52% [am] or [pm] (country dependent).
Register additional handsets You can register additional handsets to the base Manual registration station. 1 Select [Menu] > > [Register], then press [OK] to confirm. Auto registration 2 Press and hold on the base station for 5 Place the unregistered handset on the base station. seconds.
Technical data Battery • Philips: 2 x AAA NiMH 1.2 V Rechargeable 550 mAh batteries Use only the supplied batteries. Adapter Philips: MN-A102-U130 S003IB0600040 Input 100-240 V~ 100-240 V~ 50/60 Hz 200 mA 50/60 Hz 150 mA Output 6 V 400 mA...
Frequently asked questions No signal bar is displayed on the screen. My handset is in searching status, what do I do? • Purchase new ones with the same specifications. • The handset is out of range. Move it closer to the • Make sure that the base station has power supply. Bad audio (crackles, echo, etc.) base station.
Page 9
For information, refer to the extended user documentation online.