Entering The Service Tag After Replacing The System Board - Dell PowerEdge T20 Owner's Manual

For more installation information, see
8. Reconnect all cables to the system board.
9. Close the system.
10. Place the system upright on a flat, stable surface.
11. Reconnect the system to its electrical outlet and turn the system on, including any attached
peripherals.
Enter the system service tag after you replace the system board. For information on entering the service
tag, see Entering The Service Tag After Replacing The System

Entering The Service Tag After Replacing The System Board

Enter the system service tag after you replace the system board.
NOTE: To replace the system board within the warranty period, contact Dell for technical support.
To replace the system board after the system warranty expires, see
1. Power on the system.
2. Press <F2> to enter the System Setup.
3. Select Maintenance → Service Tag.
4. Enter the service tag.
NOTE: You can enter the service tag can only when the Service Tag field is empty. Ensure that
you enter the correct service tag. Once the service tag is entered, it cannot be updated or
changed.
5. Click Apply and Exit.
Installing System Components.
Board.
Removing The System Board.
61