Dell PowerEdge T20 Owner's Manual page 16

Option
USB Configuration
Audio
Miscellaneous Devices
Table 3. Security
Option
Admin Password
System Password
16
Description
• Enable SMART Reporting — This option is disabled by default.
This field configures the integrated USB controller. If Boot Support is
enabled, the system is allowed to boot any type of USB mass storage
devices (HDD, memory key, floppy).
If the USB port is enabled, the device attached to this port is enabled and
available for the operating system.
If the USB port is disabled, the operating system cannot see any device
attached to this port.
The options for USB configuration may differ based on the form factors:
• Enable Boot Support
• Enable Front USB 2.0 Ports
• Enable USB 3.0 Ports
• Enable Rear–Left Dual USB 2.0 Ports
• Enable Rear–Right Dual USB 2.0 Ports (this option is enabled by
default)
NOTE: USB keyboard and mouse always work in the BIOS setup
irrespective of these settings.
Allows you to enable or disable the integrated audio controller.
• Enable Audio — This option is enabled by default.
Allows you to enable or disable various on-board devices.
• Enable PCI Slot — This option is enabled by default.
Description
This field lets you set, change, or delete the administrator (admin)
password (sometimes called the setup password). The Admin Password
enables several security features.
1. Enter the old password.
2. Enter the new password.
3. Confirm the new password.
The password is not set by default.
This field lets you set, change, or delete the system password (previously
called the primary password). The System Password enables several
security features.
1. Enter the old password.
2. Enter the new password.
3. Confirm the new password.
The password is not set by default.