3
3
4
4
4
Figure 61
Mower Decks with 2 Blades
1. Idler pulley
2. Mower belt
3. Outside pulley
3
4
Figure 62
Mower Decks with 3 Blades
1. Idler pulley
2. Mower belt
3. Outside pulley
2
2
5
5
1
1
3
3
G014930
6
4. Spring
5. Engine pulley
6. Spring-removal tool
5
2
1
3
G014931
6
4. Spring
5. Engine pulley
6. Spring-removal tool
Installing the Mower Deck
1. Park the machine on a level surface and disengage the
blade-control switch.
2. Engage the parking brake, shut off the engine, remove
the key, and wait for all moving parts to stop before
leaving the operating position.
3. Slide the mower under the machine.
4. Lower the height-of-cut lever to the lowest position.
5. Lift the rear of the mower deck and guide the hanger
brackets over the rear lift rod
6. Attach the front support rod to the mower deck with
the clevis pin and hairpin cotter
7. Install the mower belt onto the engine pulley; refer to
Replacing the Mower Belt (page
45
(Figure
58).
(Figure
57).
44).