Installing The Mower Deck - Toro Titan MR4800 Operator's Manual

Removing the Mower Deck (continued)
6. Remove the upper fasteners securing the
brackets to all 4 lift arms.
7. Slide the mower deck rearward to remove the
mower belt from the engine pulley.
8. Slide the mower deck out from underneath the
machine.

Installing the Mower Deck

1. Park the machine on a level surface, disengage the blade-control switch, and move the
motion-control levers outward to the P
2. Shut off the engine, remove the key, and wait for all moving parts to stop before leaving
the operating position.
3. Slide the mower deck under the machine.
4. Lower the height-of-cut lever to the lowest position.
5. Install the lift links to the deck-lift arms using
the previously removed fasteners.
3464-659A
G453704
position.
ARK
G453704
Page 5–30 Maintenance: Mower-Deck Maintenance